top of page
ALL Finance terms are subject to approval. Part exchange options is also available. Contact us on 99830334 (Telephone and Whatsapp) or email us at muturimalta@gmail.com for more information
RUSH
rush 1000
Type
Type Four cylinders, 4 stroke, 16 valves, with countershaft
Timing system
“D.O.H.C”, radial valve and DLC tappet
Total displacement
998 cm3 (60.9 cu. in.)
Compression ratio
13.4:1
Starting
Electric
Bore x stroke
79 mm x 50.9 mm (3.1 in. x 2.0 in.)
Max. power - rpm (at the crankshaft)
153,0 kW (208 hp) at 13.000 rpm
Max. power - rpm (at the crankshaft) **
156,0 kW (212 hp) at 13.600 rpm**
Max. torque - rpm
116,5 Nm (11,9 kgm) at 11.000 rpm
Cooling system
Cooling with separated liquid and oil radiators
Engine management system
Integrated ignition - injection system MVICS 2.1 (Motor & Vehicle Integrated Control System) with eight injectors (4 lower fuel injectors by Mikuni + 4 upper fuel injectors by Magneti Marelli with increased fuel flow). Engine control unit Eldor Nemo 2.1, throttle body bore 50 mm diameters full ride by wire Mikuni, pencil-coil with ion-sensing technology, control of detonation and misfire - Torque control with four maps - Traction control with 8 levels + off and wheelie control with inertial platform
Electronic quick-shift
MV EAS 3.0 (Electronically Assisted Shift Up & Down)
Clutch
Wet, multi-disc with back torque limiting device and Brembo radial master cylinder/lever assembly
Transmission
Cassette style; six speed, constant mesh
Primary drive
48/82
First gear
14/37
Second gear
16/33
Third gear
18/31
Fourth gear
20/30
Fifth gear
22/29
Sixth gear
21/25
Final drive ratio
15/41
Maximum speed*
over 300 km/h (186 mph)
Acceleration
0-100 km/h in 3.15 s; 0-200 km/h in 8.30 s.
Voltage
12 V
Alternator
350 W at 5.000 rpm
Battery
Li-ion 12 V - 4.0 Ah
Frame type
CrMo Steel tubular trellis
Rear swing arm pivot plates material
Aluminium alloy - Adjustable swingarm pivot height
Front suspension type
Öhlins Nix EC hydraulic “upside down” front fork with TIN superficial treatment.Completely adjustable with electronically controlled compression and rebound damping with manually controlled spring preload.
Fork dia.
43 mm (1.69 in.)
Wheel travel
120 mm (4.72 in.)
Rear suspension type
Progressive, Öhlins EC TTX single shock absorber completely adjustable with electronically controlled compression and rebound damping and spring preload
Single sided swing arm material
Aluminium alloy
Wheel travel
120 mm (4.72 in.)
Front brake
Double floating disc with Ø 320 mm (Ø 12.6 in.) diameter, with steel braking disc and aluminium flange - Brembo radial master cylinder/level assembly
Front brake caliper
Brembo Stylema radial-type, single-piece with 4 pistons Ø 30 mm (Ø 1.18 in.)
Rear brake
Single steel disc with Ø 220 mm (Ø 8.66 in.) dia. Brembo PS13 brake master cylinder
Rear brake caliper
Brembo with 2 pistons Ø 34 mm (Ø 1.34 in.)
ABS System
Continental MK100 with RLM (Rear Wheel Lift-up Mitigation) and with cornering function
Front wheel: Material/size
Aluminium alloy spoked wheel 3,50 ” x 17 ”
Rear wheel: Material/size
Forged alluminium alloy 6,00 ” x 17 ” with carbon fiber cover
Front tyre
120/70 - ZR 17 M/C (58 W)
Rear tyre
200/55 - ZR 17 M/C (78 W)
Fairing material
Carbon fiber and thermoplastic material
Steering damper
Öhlins EC with electronic manual and automatic adjustment modes
Wheelbase
1.415 mm (55.71 in.)
Overall length
2.080 mm (81.89 in.)
Overall width
805 mm (31.69 in.)
Saddle height
845 mm (33.27 in.)
Min. ground clearance
141 mm (5.55 in.)
Trail
97 mm (3.82 in.)
Dry weight
186 kg (410.06 lbs.) - 184 kg (405.65 lbs.)**
Fuel tank capacity
16 l (4.23 U.S. gal.)
Environmental Standard
Euro 5
Combined fuel consumption
6.8 l/100 km
CO2 Emissions
158 g/km
Type Four cylinders, 4 stroke, 16 valves, with countershaft
Timing system
“D.O.H.C”, radial valve and DLC tappet
Total displacement
998 cm3 (60.9 cu. in.)
Compression ratio
13.4:1
Starting
Electric
Bore x stroke
79 mm x 50.9 mm (3.1 in. x 2.0 in.)
Max. power - rpm (at the crankshaft)
153,0 kW (208 hp) at 13.000 rpm
Max. power - rpm (at the crankshaft) **
156,0 kW (212 hp) at 13.600 rpm**
Max. torque - rpm
116,5 Nm (11,9 kgm) at 11.000 rpm
Cooling system
Cooling with separated liquid and oil radiators
Engine management system
Integrated ignition - injection system MVICS 2.1 (Motor & Vehicle Integrated Control System) with eight injectors (4 lower fuel injectors by Mikuni + 4 upper fuel injectors by Magneti Marelli with increased fuel flow). Engine control unit Eldor Nemo 2.1, throttle body bore 50 mm diameters full ride by wire Mikuni, pencil-coil with ion-sensing technology, control of detonation and misfire - Torque control with four maps - Traction control with 8 levels + off and wheelie control with inertial platform
Electronic quick-shift
MV EAS 3.0 (Electronically Assisted Shift Up & Down)
Clutch
Wet, multi-disc with back torque limiting device and Brembo radial master cylinder/lever assembly
Transmission
Cassette style; six speed, constant mesh
Primary drive
48/82
First gear
14/37
Second gear
16/33
Third gear
18/31
Fourth gear
20/30
Fifth gear
22/29
Sixth gear
21/25
Final drive ratio
15/41
Maximum speed*
over 300 km/h (186 mph)
Acceleration
0-100 km/h in 3.15 s; 0-200 km/h in 8.30 s.
Voltage
12 V
Alternator
350 W at 5.000 rpm
Battery
Li-ion 12 V - 4.0 Ah
Frame type
CrMo Steel tubular trellis
Rear swing arm pivot plates material
Aluminium alloy - Adjustable swingarm pivot height
Front suspension type
Öhlins Nix EC hydraulic “upside down” front fork with TIN superficial treatment.Completely adjustable with electronically controlled compression and rebound damping with manually controlled spring preload.
Fork dia.
43 mm (1.69 in.)
Wheel travel
120 mm (4.72 in.)
Rear suspension type
Progressive, Öhlins EC TTX single shock absorber completely adjustable with electronically controlled compression and rebound damping and spring preload
Single sided swing arm material
Aluminium alloy
Wheel travel
120 mm (4.72 in.)
Front brake
Double floating disc with Ø 320 mm (Ø 12.6 in.) diameter, with steel braking disc and aluminium flange - Brembo radial master cylinder/level assembly
Front brake caliper
Brembo Stylema radial-type, single-piece with 4 pistons Ø 30 mm (Ø 1.18 in.)
Rear brake
Single steel disc with Ø 220 mm (Ø 8.66 in.) dia. Brembo PS13 brake master cylinder
Rear brake caliper
Brembo with 2 pistons Ø 34 mm (Ø 1.34 in.)
ABS System
Continental MK100 with RLM (Rear Wheel Lift-up Mitigation) and with cornering function
Front wheel: Material/size
Aluminium alloy spoked wheel 3,50 ” x 17 ”
Rear wheel: Material/size
Forged alluminium alloy 6,00 ” x 17 ” with carbon fiber cover
Front tyre
120/70 - ZR 17 M/C (58 W)
Rear tyre
200/55 - ZR 17 M/C (78 W)
Fairing material
Carbon fiber and thermoplastic material
Steering damper
Öhlins EC with electronic manual and automatic adjustment modes
Wheelbase
1.415 mm (55.71 in.)
Overall length
2.080 mm (81.89 in.)
Overall width
805 mm (31.69 in.)
Saddle height
845 mm (33.27 in.)
Min. ground clearance
141 mm (5.55 in.)
Trail
97 mm (3.82 in.)
Dry weight
186 kg (410.06 lbs.) - 184 kg (405.65 lbs.)**
Fuel tank capacity
16 l (4.23 U.S. gal.)
Environmental Standard
Euro 5
Combined fuel consumption
6.8 l/100 km
CO2 Emissions
158 g/km
BRUTALE
dRAGSTER
turismo veloce
f
3
SUPERVELOCE
LXP
bottom of page